The Barrett REC7 MK3 Carbine is a 16" barrel AEG, officially licensed by Barrett and built for outdoor games and long lanes. It shoots 405 to 430 fps (U.S. spec), and it comes in at 33.7" collapsed and 6.2 lbs.
Up front, the 15" M-LOK handguard has room for a light, a grip and a sling. The battery goes in the stock.
The KRYTAC Nautilus gearbox runs 8mm bearings and a ported full-metal rack piston, driven by a KRYTAC neo hi-torque motor. The enhanced FET and microswitch E-trigger give you fast trigger response and 21+ rps on an 11.1V LiPo, with partial active braking built in.
Low-battery detection and gear-strip protection look after the internals, and the rotary hop-up uses a bucking that resists heat and wear. Pull the charging handle back to lock the bolt and you can reach the hop-up dial. It’s also GATE TITAN-ready if you want to tune it further.
Spare 150-round KRYTAC M4 mid-caps. A clear window lets you check your BB count at a glance.
Where to buy the Barrett REC7 MK3 Carbine
| Description | Specification |
| Type | AEG |
| Color | Tungsten |
| Caliber | 6mm |
| Velocity | MIN: 405 fps / 123 mps |
| Energy Output | 1.72 J / w.20g |
| Rate of Fire | 21+ rps w/11.1V |
| Material Finish | Anodized Alloy |
| Muzzle Color & Material | Orange / Plastic |
| Magazine Capacity | 150 |
| Barrel Threading | 14mm CCW |
| Handguard | 15" Barrett REC7 M-LOK Rail |
| Battery | LiPo Brick / Li-ion Cell |
| Recommended Voltage | 11.1V |
| Motor | KRYTAC 30K Neo Hi-Torque Motor |
| Cylinder | Type 1 |
| Engine Type | Version 2 Gearbox |
| Bucking Type | Standard |
| Overall Length Collapsed | 33.7 in / 856 mm |
| Overall Length Extended | 36.9 in / 938 mm |
| Height | 7.3 in / 186 mm |
| Weight | 6.2 lbs / 2.8 kg |
| Outer Barrel Length | 16 in / 406 mm |
| Inner Barrel Length | 416 mm |
| Inner Barrel Diameter | 6.03 mm |
Not included
BARRETT® is a registered trademark of Barrett Firearms Manufacturing. M-LOK® is a registered trademark of Magpul Industries Corp.
