The Trident MK3 PDW-M is the compact AEG in the Trident MK3 line, built for CQB and fast transitions where a full-length rifle gets in the way. At 20.8" collapsed and 5.3 lbs, it’s quick to handle in tight spaces.
Up front, the TR405 M-LOK handguard has room for a light, a grip and a sling. The mag release works from either side, and the compact carbine stock collapses when you need it out of the way.
The KRYTAC Nautilus gearbox runs 8mm bearings and a ported full-metal rack piston, driven by a KRYTAC neo hi-torque motor. The enhanced FET and microswitch E-trigger give you fast trigger response and 21+ rps on an 11.1V LiPo, with partial active braking built in.
Low-battery detection and gear-strip protection look after the internals, and the rotary hop-up uses a bucking that resists heat and wear. It’s also GATE TITAN-ready if you want to tune it further.
Spare 150-round KRYTAC M4 mid-caps. A clear window lets you check your BB count at a glance.
Where to buy the Trident MK3 PDW-M
| Description | Specification |
| Type | AEG |
| Color | Black |
| Caliber | 6mm |
| Velocity | MIN: 345 fps / 105 mps |
| Energy Output | 1.27 J / w.20g |
| Rate of Fire | 21+ rps w/11.1V |
| Material Finish | Anodized Alloy |
| Muzzle Color & Material | Orange / Plastic |
| Magazine Capacity | 150 |
| Barrel Threading | 14mm CCW |
| Handguard | TR405 M-LOK Rail System |
| Battery | LiPo Brick |
| Recommended Voltage | 11.1V |
| Motor | KRYTAC 30K Neo Hi-Torque Motor |
| Cylinder | Type 1 |
| Engine Type | Version 2 Gearbox |
| Bucking Type | Standard |
| Overall Length Collapsed | 20.8 in / 528 mm |
| Overall Length Extended | 24.1 in / 613 mm |
| Height | 7.4 in / 189 mm |
| Weight | 5.3 lbs / 2.4 kg |
| Outer Barrel Length | 5 in / 127 mm |
| Inner Barrel Length | 155 mm |
| Inner Barrel Diameter | 6.03 mm |
Not included
M-LOK® is a registered trademark of Magpul Industries Corp.
